Have you assessed your risk?

We highly recommend you read through the first stage before proceeding.

Assess your risk

Product search

You can initiate a product search by searching on any of the categories of search below and in any combination. You do not need to use all the functions if you don’t need them. For example, if you just want to look at all bollards then select ‘bollards’ and ignore all the other buttons.

The products listed here are not necessarily all the available products of this nature that are available in the HVM marketplace but those that are included here have all had their performance claims checked prior to listing.
Reset

Search results

M50 Fixed Shallow Mount Bollard

in HVM Bollards

Test passed:
IWA 14-1:2013 V/7200[N3C]/80/90:0.8

Tested by:
CTS

Supplier:
Meesons A. I. Ltd

Supplier Link:
http://www.meesons.com/

This product is manufactured by Perimeter Protection Group and supplied by Meesons

IWA 14-1:2013 V/7200[N3C]/80/90:0.8

7200: Weight in KG.

N2C: Vehicles designed and constructed for carriage of goods & having a maximum mass exceeding 3.5 tonnes but not exceeding 12 tonnes.

80: Speed in KPH (50MPH)

90: Impact angle of test in the horizontal plane, between the intended impact face and the approach path of the test vehicle intro the test item.

0.8 The penetration of the vehicle is measured from the original position of the REAR face of the equipment
M50 Tracked Sliding Gate

in HVM Gates

Test passed:
ASTM F2656-07, M50/P1

Tested by:
Karco Engineering

Supplier:
Meesons A. I. Ltd

Supplier Link:
http://www.meesons.com/

This product is manufactured by Perimeter Protection Group and supplied by Meesons

ASTM F2656-07, M50/P1

6800: Weight in KG.

M: Vehicles designed and constructed for carriage of goods.

80: Speed in KPH (50MPH)
M50 Tracked Sliding Gate

in HVM Gates

Test passed:
BSI PAS 68:2010 V/7500[N3]/80/90:0.0/4.3

Tested by:
TRL Ltd

Supplier:
Meesons A. I. Ltd

Supplier Link:
http://www.meesons.com/

This product is manufactured by Perimeter Protection Group and supplied by Meesons

BSI PAS 68:2010 V/7500[N3]/80/90:0.0/4.3

7500: Weight in KG.

N3: Vehicles designed and constructed for carriage of goods & having a maximum mass exceeding 3.5 tonnes but not exceeding 12 tonnes.

80: Speed in KPH (30MPH)

90: Impact angle of test in the horizontal plane, between the intended impact face and the approach path of the test vehicle intro the test item.

0.0: The penetration of the vehicle is measured from the original position of the REAR face of the equipment

4.3: Where major debris landed beyond the original position of the rear face of the equipment.
Wedge II Shallow Mount Road Blocker

in HVM Road Blockers

Test passed:
BSI PAS 68:2013 V/7500[N3]/80/90:0.0/20.7

Tested by:
TRL Ltd

Supplier:
Meesons A. I. Ltd

Supplier Link:
http://www.meesons.com/

This product is manufactured by Perimeter Protection Group and supplied by Meesons

BSI PAS 68:2013 V/7500[N3]/80/90:0.0/20.7

7500: Weight in KG.

N3: Vehicles designed and constructed for carriage of goods & having a maximum mass exceeding 3.5 tonnes but not exceeding 12 tonnes.

80: Speed in KPH (30MPH)

90: Impact angle of test in the horizontal plane, between the intended impact face and the approach path of the test vehicle intro the test item.

0.0: The penetration of the vehicle is measured from the original position of the REAR face of the equipment

20.7: Where major debris landed beyond the original position of the rear face of the equipment.
Wedge II Shallow Mount Road Blocker

in HVM Road Blockers

Test passed:
IWA 14-1:2013 V/7200[N3C]/80/90:0.0

Tested by:
TRL Ltd

Supplier:
Meesons A. I. Ltd

Supplier Link:
http://www.meesons.com/

This product is manufactured by Perimeter Protection Group and supplied by Meesons

IWA 14-1:2013 V/7200[N3C]/80/90:0.0

7200: Weight in KG.

N3C: Vehicles designed and constructed for carriage of goods & having a maximum mass exceeding 3.5 tonnes but not exceeding 12 tonnes.

80: Speed in KPH (50MPH)

90: Impact angle of test in the horizontal plane, between the intended impact face and the approach path of the test vehicle intro the test item.

0.0 The penetration of the vehicle is measured from the original position of the REAR face of the equipment
Wedge II Shallow Mount Road Blocker

in HVM Road Blockers

Test passed:
ASTM F2656/F2656M-15, M50/P1

Tested by:
Karco Engineering

Supplier:
Meesons A. I. Ltd

Supplier Link:
http://www.meesons.com/

This product is manufactured by Perimeter Protection Group and supplied by Meesons

ASTM F2656/F2656M-15, M50/P1

6800: Weight in KG.

M: Vehicles designed and constructed for carriage of goods.

80: Speed in KPH (50MPH)
Barrier Lift System K12 - 10.0M

in HVM Rising Arm Barriers

Test passed:
DOS SD-STD-02.01 Rev A March 2003, K12/L2

Tested by:
Karco Engineering

Length (clear opening, cm):
1000

Supplier:
Meesons A. I. Ltd

Supplier Link:
http://www.meesons.com/

This product is manufactured by Perimeter Protection Group and supplied by Meesons
S4 Bollard

in HVM Bollards

Test passed:
IWA 14-1:2013 Bollard V/7200[N2A]/48/90:0.1

Tested by:
HORIBA-MIRA Ltd

Supplier:
Swaraj Secutech Pvt. Ltd

Supplier Link:
https://swarajsecutech.com/

IWA 14-1:2013 Bollard V/7200[N2A]/48/90:0.1

7200: Weight in KG.

N2A: Vehicles designed and constructed for carriage of goods & having a maximum mass exceeding 3.5 tonnes but not exceeding 12 tonnes.

48: Speed in KPH (30MPH)

90: Impact angle of test in the horizontal plane, between the intended impact face and the approach path of the test vehicle intro the test item.

0.1 The penetration of the vehicle is measured from the original position of the REAR face of the equipment
S4-125 Bollards

in HVM Bollards

Test passed:
IWA 14-1:2013 Bollard V/7200[N2A]/48/90:0.4

Tested by:
HORIBA-MIRA Ltd

Supplier:
Swaraj Secutech Pvt. Ltd

Supplier Link:
https://swarajsecutech.com/

IWA 14-1:2013 Bollard V/7200[N2A]/48/90:0.4

7200: Weight in KG.

N2A: Vehicles designed and constructed for carriage of goods & having a maximum mass exceeding 3.5 tonnes but not exceeding 12 tonnes.

48: Speed in KPH (30MPH)

90: Impact angle of test in the horizontal plane, between the intended impact face and the approach path of the test vehicle intro the test item.

0.4 The penetration of the vehicle is measured from the original position of the REAR face of the equipment
Previous. Next.

In association with

Request a CPD Seminar at
your premises

The latest advice and guidance.

Request CPD.